SYNTHESIS, CHARACTERIZATION, AND PERFORMANCE OF Sb2(S, Se)3 BASED COMPOSITES
Abstract views: 22
/ 
PDF downloads: 17
DOI:
https://doi.org/10.5281/zenodo.15714188Abstract
Thermal evaporation method was used to create the Sb2(S,Se)3 compounds. This finding emphasizes Sb2(S,Se)3's promise as a new photovoltaic material. It has achieved good power conversion rates of 6.5% to 8%. Further efficiency improvement seems to be required for upcoming real-world applications. Sb2Se3-GaSe eutectic composites are synthesized by the vertical Bridgman method. XRD analysis and structural study of Sb2Se3-GaSe eutectics show that Sb2Se3 inclusions are uniformly distributed in the GaSe matrice. Three eutectic points were studied in the Sb2Se3-GaSe system. It was determined that the composition of the three eutectics formed in the Sb2Se3-GaSe systems is 80 wt %; 55wt % and 40wt % Sb2Se3, melt points were 776K, 725K and 698K respectively.
Keywords: XRD, SEM and EDX analysis, eutectic system, raman spectra, photovoltaic material, solar cell
References
P. Osewski, A. Belardini, M. Centini, C. Valagiannopoulos, et al., New Self-Organization Route to Tunable Narrowband Optical Filters and Polarizers Demonstrated with ZnO–ZnWO4 Eutectic Composite, Adv. Optical Mater. 2020, 1901617, DOI: 10.1002/adom.201901617
Kazimov M.V., X Ray Analysis Of InAs-CrAs Eutectic Systems, ARCENG INTERNATIONAL JOURNAL OF ARCHITECTURE AND ENGINEERING 2023 p. 94, doi.org/10.5281/zenodo.8106289
Kazimov M.V., İbragimov G.B., İsakov G.I., at al., Physical-chemical properties of InSb+Mg3Sb2 eutectic systems: Synthesis, Characterization, And Applications, Journal of Optoelectronic and Biomedical Materials, №14 (4), pp.187-190, (2022) https://doi.org/10.15251/JOBM.2022.144.187
M. V Kazimov, Synthesis and structural analysis of InSb-CrSb, InSb-Sb, GaSb-CrSb eutectic composites, Journal of Optoelectronic and Biomedical Materials Vol. 12, No. 3, p. 67 – 72, (2020)
M.V. Kazimov, G.B. Ibragimov. “Fabrication and performance characterization of Sb2Se3-GaSe eutectic systems”. Semiconductor Physics, Quantum Electronics & Optoelectronics, 2024. V. 27, No 2. P. 184-188, DOI 10.15407/spqeo27.02.184
M. V. Kazimov , D. H. Arasly, et al., Magnetic and electrical properties of GaSb-CrSb eutectic system, Journal of Non-Oxide Glasses Vol. 12, No. 1, p. 7 – 11 January - March (2020) https://doi.org/10.1116/1.4881995
S. Demirci, N. Avazlı, E. Durgun, S. Cahangirov, Structural and electronic properties of monolayer group III monochalcogenides, Physical Review B 95, 115409 (2017) DOI:https://doi.org/10.1103/PhysRevB.95.115409
P.B. Oliete, M.C. Mesa, R.I. Merino, V.M. Orera, Directionally solidified Al2O3-Yb3Al5O12 eutectics for selective emitters Sol. Energy Mater. Sol. Cells, 144 (2016), pp. 405-410, https://doi.org/10.1016/j.solmat.2015.09.053
Dennstedt, A. Choudhury, L. Ratke, B. Nestler, Microstructures in a ternary eutectic alloy: devising metrics based on neighbourhood relationships, IOP Conference Series: Materials Science and Engineering, vol. 117, IOP Publishing (2016), p. 012025, doi:10.1088/1757-899X/117/1/012025
M. Abaker, Nazar, Elamin Ahmed, A. Saa att all, Thermoelectric properties of Ga-doped InSb, Vacuum, Volume 219, Part A, January 2024,
B. Chanda, G. Potnis, P.P. Jana, J. Das, A review on nano- ultrafine advanced eutectic alloys, J.Alloys Compd., 827 (2020), p. 154226 https://doi.org/10.1016/j.jallcom.2020.154226
Liang G, Chen X, Tang R, et al. Spark plasma sintering of Sb2Se3 sputtering target towards highly efficient thin film solar cells. Solar Energy Materials and Solar Cells, 2020, 211: 110530 https://doi.org/10.1016/j.solmat.2020.110530
C. Chen, K.H. Li, S.Y. Chen, L. Wang, S.C. Lu, Y.H. Liu, D.B. Li, H.S. Song, J. Tang Efficiency improvement of Sb2Se3 solar cells via grain boundary inversion ACS Energy Lett, 3 (2018), pp. 2335-2341 DOI:10.1021/acsenergylett.8b01456
C. Yuan, L. Zhang, W. Liu, C. Zhu, Rapid thermal process to fabricate Sb2Se3 thin film for solar cell application, Sol. Energy, 137 (2016), pp. 256-260 DOI:10.1016/j.solener.2016.08.020
Xiaoyang Liang, at al., High-Efficiency Flexible Sb2Se3 Solar Cells by Back Interface and Absorber Bulk Deep-Level Trap Engineering, 8, 1, 213–221, ACS Energy Lett. (2023) https://doi.org/10.1021/acsenergylett.2c02066
I. Gharibshahian et al., Effect of the junction barrier on current–voltage distortions in the Sb2Se3/Zn(O, S) solar cells, Opt. Mater. (2021), https://doi.org/10.1016/j.optmat.2021.111098
R. Hamrouni et al., Linear and non linear optical properties of Sb2Se3 thin films elaborated from nano-crystalline mechanically alloyed powder, Applied Physics A (2018) 124:861 https://doi.org/10.1007/s00339-018-2274-1
Cheney, et al., Synthesis, characterization, and catalytic performance of Sb2Se3 nanorods, J.Nanomater. 2017, 5385908 (2017). https://doi. org/10.1155/2017/5385908
Geoffrey Tse, Dapeng Yu, The Structural, Electronic, Optical and Elastic Properties of ε-Type Gallium Selenide: A First Principle Study, Journal of Nanoelectronics and Optoelectronics, 11(5):551-567, (2016) DOI: https://doi.org/10.1166/jno.2016.1984
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 ARCENG (INTERNATIONAL JOURNAL OF ARCHITECTURE AND ENGINEERING) ISSN: 2822-6895
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The journal is licensed under a 